селф бот что это
Селф бот что это
A selfbot for Discord that is setup and ready to go in less than 5 minutes.
(If you already have the required programs installed)
Selfbots on Discord
Selfbots are officially banned. Those caught using one, will most likely be banned from Discord and have their account disabled. It has been considered as an API abuse and is no longer tolerated. Today (19/06/2018), I have decided to archive this repository and provide no more help for this project. You are still free to use it at your own risk, although like I have said many times before I am not responsible for anything you decide to do with your selfbot. Most of the code on this repository is very outdated, and if it were today, I would probably do it completely different. Maybe some day I will make another project that you will enjoy. Thanks to everyone that has used it! 😀
Please remember that selfbots arent fully suported by Discord and that it should only be used to make YOUR life easier and not others. Also keep in mind that discord has a set of semi-offical rules regarding selfbots:
IF, and only if, you accept the above rules of selfbots, then you may proceed.
Before you can download and setup the bot, there are 2 programs you need to have installed on your computer to make sure everything runs on first go:
After you have the required programs installed, you can go ahead and download the project files. To do that, you either download the ZIP folder or do git clone https://github.com/TheRacingLion/Discord-SelfBot.git if you are a console person. Once you finish downloading it,you will be ready to setup the config files.
This is the folder where you drag and drop your avatar images if you enabled avatar rotating.
This is the main config file. Inside you will see several options. This is what each one means:
This file is where the meme texts are stored for the paste command, if you wish to add more to use with paste just follow the structure of the file and add them in. If an array is specified for one of the options then the bot will choose a random item from the array.
When you have the required programs installed, have all project files, and have setup config files, you can start the bot:
Open the installer.bat file. This will install the required node modules (so you dont have to do it yourself) and create a run.bat file. You can use this file to start the bot. If you did everything correctly, the bot should start up fine.
All commands get logged to console, are case insensentive and are tested to see if the owner of the bot was the one who triggered the command. It should be easy to create commands if you know the basics of JavaScript. The library used is Eris.
The bot has several default commands. (Each command is explained inside their own file.) You can find a detailed command list here.
When you want to create a new command, just add a new file to the commands folder and name it something like mycommand.js and then follow the basic structure below. If your command needs some kind of special options like permissions or you just want to set it to be used on guilds only, then you can use the pre-made command options shown below. There are also some helper functions built in to the function.
The selfbot comes with its own logger file, which includes a few options to log things to console. If you know what you are doing, you can add many more. It uses Chalk to change the color of the logged text, so you can change the colors if you do not like them.
If you just want to log text to console, you can do:
If you want to log a warning to console, you can do:
If you want to log errors to console, you can do:
MIT. Copyright © 2016, 2017, 2018 TheRacingLion.
Пишем диалоговые Telegram-боты на Питоне
Думаю, всем здесь в той или иной мере известен мессенджер Telegram. Создатель заявляет, что это самый безопасный мессенджер с убойным алгоритмом шифрования собственной разработки, но нас, разработчиков, конечно же, куда сильнее интересует другое. Боты!
Тема эта, конечно, не раз поднималась на Хабре: ботов писали на Python с tornado, Node.js, Ruby со специальным гемом, Ruby on Rails, C#, C# с WCF и даже PHP; ботов писали для RSS-каналов, мониторинга сайтов, удалённого включения компьютера и, вероятно, для многого, многого другого.
И всё же я возьму на себя смелость изъездить эту тему ещё раз и вдобавок к этому показать немного магии Питона. Мы будем писать фреймворк™ для удобного написания нетривиальных диалоговых ботов на основе пакета python-telegram-bot.
Как зачать бота?
На этот вопрос лучше всего отвечает официальная документация. Выглядит процесс примерно так:
Просто, не правда ли? (Будьте благоразумны и не занимайте хорошие никнеймы без убедительной причины!)
Самый простой бот
Сперва глянем в туториал нашего базового пакета, чтобы понять, с чего начинается простенький бот. Следующий код
создаёт бота, который сухо отвечает «Здравствуйте.» при нажатии на кнопку Start (или ручном вводе команды /start ) и многозначительно молчит при любых последующих действиях с вашей стороны.
(За дальнейшими подробностями с чистой совестью отсылаю к документации python-telegram-bot.)
Нагруженные этим теоретическим минимумом, мы можем наконец подумать, как нам писать своего нетривиального бота. Для начала давайте вернёмся к постановке задачи. Под диалоговым ботом я подразумеваю бота, который главным образом ведёт обычный текстовый диалог с пользователем — с вопросами, ответами, нелинейным сюжетом, разочаровывающими концовками и всем в таком духе (играли в «Бесконечное лето»?) Напротив, не попадают в сферу наших текущих интересов боты, разным образом расширяющие функционал Telegram (вроде бота для лайков); соответственно, мы опустим добавление всяких плюшек вроде инлайнового режима, игр, обновления элементов управления на лету и всего такого прочего.
50 оттенков yield
Куда менее известными навыками слова yield являются способности… возвращать значения и бросать исключения! Да-да, если мы напишем:
Но и это ещё не всё. Начиная с Python 3.3, генераторы умеют делегировать выполнение друг другу с помощью конструкции yield from : вместо
она позволяет нам писать
А ещё yield from тоже умеет возвращать значение: для этого функциям-генераторам вернули право на нетривиальный (то есть возвращающий что-то, а не просто заканчивающий выполнение) return :
К чему я всё это? Ах да. Эти фокусы, вместе взятые, позволят нам легко и естественно писать наших диалоговых ботов.
Пишем обёртку
Итак, пусть диалог с каждым пользователем ведётся генератором. yield будет выдавать наружу сообщение, которое надо отправить пользователю, и возвращать внутрь его ответ (как только он появится). Давайте напишем простенький класс, который умеет это делать.
Что ж, осталось сочинить диалог, который мы будем отыгрывать! Давайте поговорим о Питоне.
И это работает! Результат выглядит примерно так:
Добавляем разметку
Боты в Telegram сильны тем, что могут кидаться в своих пользователей HTML- и Markdown-разметкой; эту возможность обойти стороной нам было бы непозволительно. Чтобы понять, как послать сообщение с разметкой, давайте взглянем на описание функции Bot.sendMessage :
Теперь отправка сообщений будет выглядеть так:
Для демонстрации давайте модифицируем ask_yes_or_no() :
Добавляем кнопки
Единственное, чего нам не хватает и что могло бы вполне себе пригодиться при написании диалоговых ботов — клавиатура с выбором вариантов ответа. Для создания клавиатуры нам достаточно добавить в Message.options ключ reply_markup ; но давайте постараемся максимально упростить и абстрагировать наш код внутри генераторов. Здесь напрашивается решение попроще. Пусть, например, yield выдаёт не один объект, а сразу несколько; если среди них есть список или список списков со строками, например:
, то мы считаем, что это кнопки клавиатуры, и хотим получить примерно следующий результат:
_send_answer() тогда преобразуется в нечто такое:
В качестве демонстрации поменяем ask_yes_or_no() и discuss_bad_python() :
Заключение
Генераторы в Питоне — мощный инструмент, и использование его в нужных ситуациях позволяет значительно сокращать и упрощать код. Посмотрите, как красиво мы, например, вынесли вопрос «да или нет» в отдельную функцию, притом оставив за ним право проводить дополнительное общение с пользователем. Так же мы могли бы вынести в отдельную функцию и вопрошание имени, и научить его уточнять у пользователя, верно ли мы его поняли, и так далее, и тому подобное. Генераторы сами хранят за нас состояние диалога, и сами умеют продолжать его с требуемого момента. Всё для нас!
Надеюсь, эта статья была кому-то полезной. Как водится, не стесняйтесь сообщать обо всех опечатках, орфографических и грамматических ошибках в личку. Весь код к статье лежит в репозитории на Github (ветка habrahabr-316666 ). На бота ссылку не дам и живым его держать, конечно, ближайшее время не буду, иначе хабраэффект накроет его вместе с моим компьютером. Успехов в создании своих диалоговых ботов 😉
Селф бот что это
Dropped development beacuse of Discords stance towards Selfbots.
With a little cleanup here and there it should however still work with the rewrite version of discord.py
This Project uses the rewrite version of discord.py as well as Python 3.6 or higher. Please keep this in mind when using the bot.
This SelfBot has a lot of useful features like a bunch of Moderation commands as well as fun commands or a Mention logger.
Disclaimer: Use this on your own risk. If you get banned somewhere because of using it I won’t take responsibility.
Clone this repo or download it as Zip and move/unpack it to the location where you wanna have it.
Now after this is done, open the config file and start adding your information. Notepad should be enough to edit the file.
You can skip any step if your System already fulfills the step.
As mentioned above we need to install Python 3.6 or higher, anything below won’t work with this SelfBot.
Starting the Bot Automatically
Starting the Bot Manually
Here you see the base commands I added, you can add anything you want here of course. (command to do it while the bot is running #SoonTM)
Keep in mind that if you have a \ in your text you need to do 2 of them. like you can see with shrug.
Adding Your Own Stuff
In order to use the /i command to image search, you will need a Google API key and a Custom Search Engine ID.
Follow these steps to obtain them:
Note: Google may take a little while to properly register your key so the search feature may not work right away. If it’s still not working after a few hours, then you may have messed up somewhere.
Селф бот что это
A simple, easy to use, non-restrictive, synchronous Discord API Wrapper for Selfbots/Userbots written in Python.
-using requests and websockets 🙂
* You can send issues to discordtehe@gmail.com (arandomnewaccount will respond). If you put them in the issues tab, either arandomnewaccount will edit your message to «respond» because he can’t post public comments or Merubokkusu will respond. Please at least read the README before submitting an issue.
** Will get some time to update stuff after Dec 10, 2021
Discum is a Discord self/userbot api wrapper (in case you didn’t know, self/userbotting = automating a user account). Whenever you login to discord, your client communicates with Discord’s servers using Discord’s http api (http(s) requests) and gateway server (websockets). Discum allows you have this communication with Discord using python.
The main difference between Discum and other Discord api wrapper libraries (like discord.py) is that discum is written and maintained to work on user accounts (so, perfect for selfbots/userbots). We test code on here and develop discum to be readable, expandable, and useable. Functions that are risky to use are clearly stated as such in the docs.
Note, using a selfbot is against Discord’s Terms of Service and you could get banned for using one if you’re not careful. Also, this needs to be said: discum does not have rate limit handling. The main reasons for this are that discum is made to (1) be (relatively) simple and (2) give the developer/user freedom with how to handle the rate limits. We (Merubokkusu and anewrandomaccount) do not take any responsibility for any consequences you might face while using discum. We also do not take any responsibility for any damage caused (to servers/channels) through the use of Discum. Discum is a tool; how you use this tool is on you.
To install the library normally, run:
Otherwise, to also use remote authentication functions (login using a phone & qr code), run:
Prerequisites (installed automatically using above methods)
remote auth prerequisites (if you install discum[ra]):
Contributions are welcome. You can submit issues, make pull requests, or suggest features. Ofc not all suggestions will be implemented (because discum is intended to be a transparent, relatively-raw discord user api wrapper), but all suggestions will be looked into.
Please see the contribution guidelines
Q: Why am I getting Attribute Errors?
A: Most likely you’ve installed discum through pip, which is not always updated. To get the most recent version, install through github. For gateway.session related errors, you need to connect to the gateway at least once to receive session data.
Q: Does discum support BOT accounts?
A: No. Discum only supports user accounts.
Q: What’s the difference between user/private API and BOT API?
A: User APIs are run by the official client. Many of these are not documented by discord. On the other hand, BOT APIs are run by BOT accounts and are documented by discord. Discum only consists of user APIs.
Q: import _brotli ImportError: DLL load failed: The specified module could not be found. How to fix?
A: https://github.com/google/brotli/issues/782
In recent years, token logging has become more common (as many people don’t check code before they run it). I’ve seen many closed-source selfbots, and while surely some are well intentioned, others not so much. Discum (discord api wrapper) is open-sourced and organized to provide transparency, but even so, we encourage you to look at the code. Not only will looking at the code help you to better understand how discord’s api is structured, but it’ll also let you know exactly what you’re running. If you have questions about Discum (after looking at the docs & previous issues), free to ask us.
About
A Discord API Wrapper for Userbots/Selfbots written in Python.
Селф бот что это
A selfbot for Discord that is setup and ready to go in less than 5 minutes.
(If you already have the required programs installed)
Selfbots on Discord
Selfbots are officially banned. Those caught using one, will most likely be banned from Discord and have their account disabled. It has been considered as an API abuse and is no longer tolerated. Today (19/06/2018), I have decided to archive this repository and provide no more help for this project. You are still free to use it at your own risk, although like I have said many times before I am not responsible for anything you decide to do with your selfbot. Most of the code on this repository is very outdated, and if it were today, I would probably do it completely different. Maybe some day I will make another project that you will enjoy. Thanks to everyone that has used it! 😀
Please remember that selfbots arent fully suported by Discord and that it should only be used to make YOUR life easier and not others. Also keep in mind that discord has a set of semi-offical rules regarding selfbots:
IF, and only if, you accept the above rules of selfbots, then you may proceed.
Before you can download and setup the bot, there are 2 programs you need to have installed on your computer to make sure everything runs on first go:
After you have the required programs installed, you can go ahead and download the project files. To do that, you either download the ZIP folder or do git clone https://github.com/TheRacingLion/Discord-SelfBot.git if you are a console person. Once you finish downloading it,you will be ready to setup the config files.
This is the folder where you drag and drop your avatar images if you enabled avatar rotating.
This is the main config file. Inside you will see several options. This is what each one means:
This file is where the meme texts are stored for the paste command, if you wish to add more to use with paste just follow the structure of the file and add them in. If an array is specified for one of the options then the bot will choose a random item from the array.
When you have the required programs installed, have all project files, and have setup config files, you can start the bot:
Open the installer.bat file. This will install the required node modules (so you dont have to do it yourself) and create a run.bat file. You can use this file to start the bot. If you did everything correctly, the bot should start up fine.
All commands get logged to console, are case insensentive and are tested to see if the owner of the bot was the one who triggered the command. It should be easy to create commands if you know the basics of JavaScript. The library used is Eris.
The bot has several default commands. (Each command is explained inside their own file.) You can find a detailed command list here.
When you want to create a new command, just add a new file to the commands folder and name it something like mycommand.js and then follow the basic structure below. If your command needs some kind of special options like permissions or you just want to set it to be used on guilds only, then you can use the pre-made command options shown below. There are also some helper functions built in to the function.
The selfbot comes with its own logger file, which includes a few options to log things to console. If you know what you are doing, you can add many more. It uses Chalk to change the color of the logged text, so you can change the colors if you do not like them.
If you just want to log text to console, you can do:
If you want to log a warning to console, you can do:
If you want to log errors to console, you can do:
MIT. Copyright © 2016, 2017, 2018 TheRacingLion.
About
A javascript discord selfbot that is setup and ready to go in less than 5 min.